How To Build A Dosatron Biocide Dosing Box

In this video I show you how to build a homemade Dosatron biocide dosing box saving you around 280.00. The dosing box is for applying biocide on roofs after they have been cleaned and other Softwash applications. The Dosatron mixes the chemical to the exact percentage required and only uses tap pressure so no power is needed. Its an easy build and only a few basic tools are needed. Below is a complete list of the items needed some are affiliate links how much they were including postage and where I got them from. Dosatron D07 RE5 379.20 Euro Container - 400 x 300 x 320mm 30L 34 Water ButtStorage Tank Threaded Connector with Single hozelock Type Connector 34 Braided hose. 1metre Water Pressure Reducing Valve 34 Female for 22mm Pipe with Gauge Hose tail fittings. 34BSP female thread 90 bend x20mm hose tail x 3. 34BSP male thread 90 bend x20mm hose tail x 1. 34BSP male thread to 20mm hose tail x1 34BSP female thread to 20mm hose tail x 1 41.77 Total Cost around 502.48 Notes Many of the parts are available from other suppliers but when shipping is added they end up more expensive than Amazon. The hose fitting are available from other places but many say not to be used under pressure. List prices and availability were correct at time of publishing. Chapters 0:00 Introduction 0:31 Parts and Tools 2:00 Dry Fitting 6:53 Fitting In Box 9:58 Testing,

#